PhD Thesis

You can find below information on the PhD theses that were done by the ESRs in the framework of the project

 

Nicolas Somers, Doping of beta-tricalcium phosphates and shaping of macroporous scaffolds by robocasting, Université Polytechnique Hauts-de-France, 2021. French manuscript: https://www.theses.fr/en/2021UPHF0046

Video of the PhD presentation for the defense: https://youtu.be/d5vD_M69OSs


Giovanni Urruth Bruno, Tailoring ceramic powders for additive manufacturing: From synthesis to the final part, Université de Toulouse - Toulouse INP, 2021, English manuscript: https://www.theses.fr/en/s212094

 

Pedro Jesus Navarrete Segado, Tailoring calcium phosphate powder properties for additive manufacturing, Université de Toulouse - Toulouse INP, 2021, English manuscript: https://www.theses.fr/en/s210200

Video of the PhD presentation for the defense: https://www.youtube.com/live/RAwbKhqpjLY


Qirong Chen, Ceramic powder-based hybrid binder jetting system, Université Polytechnique Hauts-de-France, 2022. English manuscript: https://www.theses.fr/en/2022UPHF0006

 

Chloé Goutagny, Optimisation of the stereolithography printing process for β-Tricalcium Phosphate, Université Polytechnique Hauts-de-France, 2021. French manuscript: https://www.theses.fr/en/2021UPHF0035

Video of the PhD presentation for the defense: https://youtu.be/tv9Dr6bWHn8

 

Mohamed  Eid Saied Abdelmoula, Powder bed selective laser melting/sintering of high-technical ceramic materials, Gazi University, 2022. English manuscript on request.

 

Abdeldjalil Islam Bouakaz, PhD thesis not defended yet. The manuscript will be available on https://www.theses.fr/en/s210346


Asif Ur Rehman, Effect of pre-heating and processing parameters on the laser additive manufacturing via multiphysics simulation and experimentation, Gazi University - 2023. English manuscript on request.

 

Rezvan Gharehbaghi, PhD thesis not defended.

 

Eren Ozmen, Direct powder-bed selective laser sintering/melting of zirconia-based ceramics and their assembly with metals as multi-materials, Université de Toulouse - Toulouse INP, 2022, English manuscript: https://www.theses.fr/en/s210199

Video of the PhD presentation for the defense: https://youtu.be/fXuR5czSCfI

 

Alejandro Monton Zarazaga, Additive manufacturing of silicon carbide-based ceramics by powder bed selective laser processing : from the functionalized powder to the final part, Université de Toulouse - Toulouse INP, 2021, English manuscript: https://www.theses.fr/en/2021INPT0085

Video of the PhD presentation for the defense: https://youtu.be/uVg-XX4qhuY

 

Ambra Paterlini, Lithography-based ceramic manufacturing of semi-porous orthopaedic implants: printed parts, tribology and design of a finger joint prototype, University of Birmingham, 2022, English manuscript on request.

 

Muhammad Arif Mahmood, Experiments and Modelling in Laser Additive Manufacturing for Metallic and Ceramic Parts: A Correlation Study, University of Bucharest, 2021. English manuscript on request.

Video of the PhD presentation for the defense: https://youtu.be/qXyFvwE6jnk


Mohammad Ali Ausaf Qureshi, Development of a microscale numerical modelling method for the simulation of 3D powder bed printing of Bioceramics, PhD thesis not defended yet.
 

Contact us

DOC-3D-PRINTING

Contact

    This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie SkÅ‚odowska-Curie grant agreement No 764935