Articles

You can find below all the articles (open access) that have been published in the framework of the project.

Giovanni Urruth, Delphine Maury, Christophe Voisin, Vincent Baylac, David Grossin, Powder bed selective laser processing (sintering / melting) of Yttrium Stabilized Zirconia using carbon-based material (TiC) as absorbance enhancer, Journal of the European Ceramic Society, Volume 42, Issue 5, (2022), DOI: 10.1016/j.jeurceramsoc.2021.12.042

P. Navarrete-Segado, C. Frances, M. Tourbin, C. Tenailleau, B. Duployer, D. Grossin “Powder bed selective laser process (sintering/melting) applied to tailored calcium phosphate-based powders” Additive Manufacturing 50, 102542 (2022) DOI: 10.1016/j.addma.2021.102542

P. Navarrete-Segado, M. Tourbin, C. Frances, D. Grossin “Masked stereolithography of hydroxyapatite bioceramic scaffolds: From powder tailoring to evaluation of 3D printed parts properties” Open Ceramics 100235 (2022). DOI: 10.1016/j.oceram.2022.100235

P. Navarrete-Segado, M. Tourbin, D. Grossin, C. Frances “Tailoring hydroxyapatite suspensions by stirred bead milling”, Ceramics International 48 24953–24964. (2022) DOI: 10.1016/j.ceramint.2022.05.149

P. Navarrete-Segado, C. Frances, D. Grossin, M. Tourbin “Tailoring hydroxyapatite microspheres by spray-drying for powder bed fusion feedstock”, Powder Technology 398 (2022) 117116. DOI: 10.1016/j.powtec.2022.117116

Qirong Chen, Enrique Juste, Marie Lasgorceix, Fabrice Petit, Anne Leriche, Binder jetting process with ceramic powders: influence of powder properties and printing parameters; Journal: Open Ceramics 9 (2022) https://doi.org/10.1016/j.oceram.2022.100218 

N. Somers, F. Jean, M. Lasgorceix, H. Curto, G. Urruth, A. Thuault, F. Petit, A. Leriche, Influence of dopants on thermal stability and densification of β-tricalcium phosphate powders, Open Ceramics. 7 (2021) 100168. DOI: 10.1016/j.oceram.2021.100168

Chloé Goutagny, Stéphane Hocquet, Dominique Hautcoeur, Marie Lasgorceix, Nicolas Somers, Anne Leriche, Development of calcium phosphate suspensions suitable for the stereolithography process” Open Ceramics, vol 7, (2021) https://doi.org/10.1016/j.oceram.2021.100167

Alejandro Montón, Mohammed Abdelmoula, Gökhan Küçüktürk, Francis Maury, David Grossin and Marc Ferrato, Experimental and numerical study for direct powder bed selective laser processing (sintering/melting) of silicon carbide ceramic" Materials Research Express 8, no. 4 (2021): 04560 https://doi.org/10.1088/2053-1591/abf6fc

Mohammed Abdelmoula, Gökhan Küçüktürk, "Multi-Layer Simulation of the Powder Bed Selective Laser Processing of Alumina for Residual Stress and Distortion Evaluation." Materials 15, no. 10 (2022): 3498. https://doi.org/10.3390/ma15103498

Mohamed Abdelmoula, Alejandro Montón Zarazaga, Gökhan Küçüktürk, Francis Maury, David Grossin and Marc Ferrato, "Scanning strategy investigation for direct powder bed selective laser processing of silicon carbide ceramic." Applied Sciences 12, no. 2 (2022): 788. https://doi.org/10.3390/app12020788

Mohamed Abdelmoula, Gökhan Küçüktürk, Enrique Juste and Fabrice Petit, "Powder Bed Selective Laser Processing of Alumina: Scanning Strategies Investigation." Applied Sciences 12, no. 2 (2022): 764. https://doi.org/10.3390/app12020764

Alejandro Montón, Mohammed Abdelmoula, Gökhan Küçüktürk, Francis Maury, Marc Ferrato and David Grossin, "Process parameters investigation for direct powder bed selective laser processing of silicon carbide parts." Progress in Additive Manufacturing 7, no. 6 (2022): 1307-1322. https://doi.org/10.1007/s40964-022-00305-7

Asif UR REHMAN, F. Pitir, M.U. Salamci, Laser Powder Bed Fusion (LPBF) of In718 and the Impact of Pre-Heating at 500 and 1000 ◦C: Operando Study, Materials 2021, 14(21), 6683; https://doi.org/10.3390/ma14216683

Asif UR REHMAN, F. Pitir, M.U. Salamci, Full-Field Mapping and Flow Quantification of Melt Pool Dynamics in Laser Powder Bed Fusion of SS316L, Met. 2021, Vol. 14, Page6264.21 (2021) https://doi.org/10.3390/ma14216264

UR REHMAN, Asif, Mahmood, MA. Peyman, A. Pitir, F. Salamci, MU. Popescu, AC. Mihailescu, IN. Spatter Formation and Splashing Induced Defects in Laser-based Powder Bed Fusion of AlSi10Mg Alloy: High-fidelity Modelling and Empirical Testing. Metals 2021, 11, https://doi.org/10.3390/met11122023

Asif UR REHMAN, Muhammad Arif Mahmood, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu and Ion N. Mihailescu, Keyhole Formation by Laser Drilling in Laser Powder Bed Fusion of Ti6Al4V Biomedical Alloy: Mesoscopic Computational Fluid Dynamics Simulation versus Mathematical Modelling Using Empirical Validation, Nanomaterials 2021, 11(12), 3284  https://doi.org/10.3390/nano11123284

P. Ansari, A. UR REHMAN, F. Pitir, S. Veziroglu, Y.K. Mishra, O.C. Aktas, M.U. Salamci, Selective Laser Melting of 316L Austenitic Stainless Steel: Detailed Process Understanding Using Multiphysics Simulation and Experimentation, Met. 2021, Vol. 11, Page1076.11(2021) https://doi.org/10.3390/met11071076.

Muhammad Arif Mahmood, Asif UR REHMAN, Fatih Pitir, Metin Uymaz Salamci, Andrei C. Popescu and Ion N. Mihailescu, Advances in Laser Additive Manufacturing of Cobalt–Chromium Alloy Multi-Layer Mesoscopic Analytical Modelling with Experimental Correlations: From Micro-Dendrite Grains to Bulk Objects, Nanomaterials 2022, 11(12), 3284   https://doi.org/10.3390/nano12050802

Asif UR REHMAN, Abid Ullah, Tingting Liu, Rashid Ur Rehman, Metin U. Salamci, Additive manufacturing of Al2O3 ceramics with MgO/SiC contents by laser powder bed fusion process. Front. Chem. 11:1034473. https://doi.org/10.3389/fchem.2023.1034473

Asif Ur Rehman, Abid Ullah, Liu Tingting;, M. Uymaz Salamci, Liao Wenhe, Selective Laser Oxidation Sintering of Cuprous oxide, Materials Letters: x, (accepted, in press, Full APC waiver award by Elsevier),  https://doi.org/10.1016/j.mlblux.2022.100172

UR REHMAN, Asif, Muhammad Ahsan Saleem, Tingting Liu,Kai Zhang, Fatih Pitir and Metin Uymaz Salamci; Influence of silicon carbide on Laser Powder Bed Fusion (LPBF) of alumina, Materials 2022, 15(2), 637  https://doi.org/10.3390/ma15020637

Mahmood, MA. Chioibasu, D. UR REHMAN, Asif, Mihai, S. Popescu, AC. Post-processing techniques to enhance the metallic parts quality produced by laser additive manufacturing. Metals 2021, 11(in press)  https://doi.org/10.3390/met12010077

UR REHMAN A., Mahmood, MA.; Pitir, F.; Salamci, M.U.; Mihailescu, IN.,  Laser Melting Deposition Additive Manufacturing of Ti6Al4V Biomedical Alloy: Mesoscopic In-situ Flow Field Mapping Via Computational Fluid Dynamics and Analytical Modelling with Empirical Testing. Materials 2021, 11, (in press) https://doi.org/10.3390/ma14247749

A. UR REHMAN, M. A. Mahmood, F. Pitir, M.U. Salamci, A. C. Popescu, I. N. Mihailescu, Mesoscopic Computational Fluid Dynamics Modelling for the Laser-Melting Deposition of AISI 304 Stainless Steel Single Tracks with Experimental Correlation: A Novel Study, Met. 2021, Vol. 11, Page1569.10(2021) https://doi.org/10.3390/met11101569

A Montón, F Maury, G Chevallier, C Estournès, M Ferrato, D Grossin “Densification of surface-modified silicon carbide powder by spark-plasma-sintering” Journal of the European Ceramic Society 41 (15), 7543-7551 https://doi.org/10.1016/j.jeurceramsoc.2021.07.036

A. Paterlini, A. Stamboulis, V. Turq, R. Laloo, M. Schwentenwein, D. Brouczek, M. Piccinini, G. Bertrand, Lithography-based manufacturing of advanced ceramics for orthopaedic applications: A comparative tribological study, Open Ceramics, Volume 8, 100170, 2021, https://doi.org/10.1016/j.oceram.2021.100170

Cristian N. Mihailescu, Muhammad Arif Mahmood, Natalia Mihailescu, Mihai Oane. One-temperature analytical model for femto-/atto-second laser-metals drilling: a novel approach. Materials, Volume 15, 2022, 5010, https://doi.org/10.3390/ma15145010

Muhammad Arif Mahmood, Diana Chioibasu, Sabin Mihai, Mihai Iovea, Ion N. Mihailescu, Andrei C. Popescu. Non-destructive x-ray characterization of a novel joining method based on laser-melting deposition for AISI 304 stainless steel. Materials, Volume 14 (24), 2021, 7749. https://doi.org/10.3390/ma14247796.

Sabin Mihai, Diana Chioibasu, Muhammad Arif Mahmood, Liviu Duta, Marc Leparoux, Andrei C. Popescu. Real-Time Defects Analyses Using High-Speed Imaging during Aluminum Magnesium Alloy Laser Welding. Metals, Volume 11, 2021, 1877. https://doi.org/10.3390/met11111877.

Mihai Oane, Muhammad Arif Mahmood, Andrei C. Popescu. A state-of-the-art review on integral transform technique in laser-material interaction: Fourier and non-Fourier heat equations Materials, Volume 14(16), 2021, 4733. https://doi.org/10.3390/ma14164733.

Muhammad Arif MAHMOOD, Andrei C. POPESCU, (2021), A state-of-the-art direct metal laser sintering of Ti6Al4V and AlSi10Mg alloys: Surface roughness, tensile strength, fatigue strength and microstructure, optics and laser technology, 143, 107366, https://doi.org/10.1016/j.optlastec.2021.107366

Muhammad Arif MAHMOOD, Andrei C. POPESCU, 3D Printing at Micro-Level: Laser-Induced Forward Transfer and Two-Photon Polymerization, Polymers, June 2021, 13, 2034, https://doi.org/10.3390/polym13132034

Muhammad Arif MAHMOOD, Andrei C. POPESCU, Mihai OANE, Asma CHANNA, Sabin MIHAI, Carmen RISTOSCU, Ion N. MIHAILESCU, Bridging the analytical and artificial neural network models for keyhole formation with experimental verification in laser melting deposition: A novel approach, Results in Physics 26 (June 2021) 104440 https://doi.org/10.1016/j.rinp.2021.104440

David GROSSIN, Alejandro MONTÓN, Pedro NAVARRETE-SEGADO, Eren ÖZMEN, Giovanni URRUTH, Francis MAURY, Delphine MAURY, Christine FRANCES, Mallorie TOURBIN, Pascal LENORMAND, Ghislaine BERTRAND, A review of additive manufacturing of ceramics by powder bed selective laser processing (sintering / melting): Calcium phosphate, silicon carbide, zirconia, alumina, and their composites, Open Ceramics 5 (February 2021) 100073 https://doi.org/10.1016/j.oceram.2021.100073

Muhammad Arif Mahmood, Andrei C. Popescu, Mihai Oane, Diana Chioibasu, Gianina Popescu-Pelin, Carmen Ristoscu, Ion N. Mihailescu (2021) grain refinement and mechanical properties for aisi304 stainless steel single-tracks by laser melting deposition: mathematical modelling versus experimental results, results in physics 22, 103880. https://doi.org/10.1016/j.rinp.2021.103880

Mihai Oane, Muhammad Arif Mahmood, Andrei C. Popescu, Alexandra Bănică, Carmen Ristoscu, Ion N. Mihăilescu. Thermal Nonlinear Klein-Gordon Equation for Nano-Micro-Sized Metallic Particle-Attosecond Laser Pulse Interaction. Materials, Volume 14, 2021, 857. https://doi.org/10.3390/ma14040857.

Muhammad Arif MAHMOOD, Alexandra BĂNICĂ, Carmen RISTOSCU, Nicu BECHERESCU, Ion N. MIHĂILESCU. Laser Coatings via State-of-the-Art Additive Manufacturing: A Review. Coatings, Volume 11(3), 2021, 296. https://doi.org/10.3390/coatings11030296

Muhammad Arif MAHMOOD, Anita Ioana VISAN, Carmen RISTOSCU, and Ion N. MIHAILESCU, Artificial Neural Network Algorithms for 3D Printing, Materials 2021, 14, 163. https://doi.org/10.3390/ma14010163

Diana CHIOIBASU, Sabin MIHAI, Muhammad Arif MAHMOOD, Mihail LUNGU, Ioana POROSNICU, Adrian SIMA, Cosmin DOBREA, Ion TISEANU and Andrei C. POPESCU, Use of X-ray Computed Tomography for Assessing Defects in Ti Grade 5 Parts Produced by Laser Melting Deposition, Metals October 2020, 10, 1408; http://dx.doi.org/10.3390/met10111408

Muhammad Arif MAHMOOD, Chang-Fu HAN, Hsiao-Yeh CHU, Ching-Cherng SUN, Wen-Hsuan WU, Wei-Jr LIN, Lee-Cheng LIU, Jiing-Yih LAI, Ion N. MIHAILESCU, Jen-Fin LIN, Effects of roll pattern and reduction ratio on optical characteristics of A1008 cold–rolled steel specimens: analytical approach and experimental correlations, The International Journal of Advanced Manufacturing Technology October 2020, https://doi.org/10.1007/s00170-020-06191-z

Muhammad Arif MAHMOOD, Andrei C. POPESCU, Claudiu Liviu HAPENCIUC, Carmen RISTOSCU, Anita Ioana VISAN, Mihai OANE & Ion N. MIHAILESCU, Estimation of clad geometry and corresponding residual stress distribution in laser melting deposition: analytical modeling and experimental correlations, The International Journal of Advanced Manufacturing Technology,  111, pages 77–91 (September 2020) https://doi.org/10.1007/s00170-020-06047-6

Muhammad Arif MAHMOOD, Andrei C. POPESCU, Mihai OANE, Carmen RISTOSCU, Diana CHIOIBASU, Sabin MIHAI and Ion N. MIHAILESCU, Three-Jet Powder Flow and Laser-Powder Interaction in Laser Melting Deposition: Modelling Versus Experimental Correlations,  Metals, August 2020, 10(9), 1113, https://doi.org/10.3390/met10091113

Anca M. BUCĂ, Mihai OANE, Ion N. MIHĂILESCU, Muhammad Arif MAHMOOD, Bogdan A. SAVA and Carmen RISTOSCU, An Analytical Multiple-Temperature Model for Flash Laser Irradiation on Single-Layer Graphene, Nanomaterials, July 2020, 10, 1319; https://doi.org/10.3390/nano10071319

Muhammad Arif MAHMOOD, Andrei C. POPESCU and Ion N. MIHAILESCU, Metal Matrix Composites Synthesized by Laser-Melting Deposition: A Review, Materials, June 2020, 13, 2593; https://doi.org/10.3390/ma13112593

Anca M. BUCĂ, Mihai OANE, Muhammad Arif MAHMOOD, Ion N. MIHĂILESCU, Andrei C. POPESCU, Bogdan A. SAVA and Carmen RISTOSCU, Non-Fourier Estimate of Electron Temperature in Case of Femtosecond Laser Pulses Interaction with Metals, Metals, May 2020, 10, 606; https://doi.org/10.3390/met10050606